Zotac’s GTX 1080 ArcticStorm Sports Water Cooling

Posted by at 8:48 am on August 11, 2016

ZT-P10800F-30P_image1

Liquid cooling a graphics card is a lot of fun, but replacing the factory cooler usually means you  have nuked your warranty. From time to time, though, graphics card manufacturers make variants that come with water blocks pre-installed, and such is the case with Zotac’s new GTX 1080 ArcticStorm.

ZT-P10800F-30P_image5

The Pascal-based GP104 GPU on the GTX 1080 comes with 2,560 Cuda cores, and Zotac clocked the unit to a base frequency of 1,632 MHz. On Boost the card should run at 1,771 MHz. This isn’t much faster than the standard Founder’s Edition card, but it is a small overclock nonetheless. Its 8 GB of GDDR5X memory runs over a 256-bit memory interface at the standard 10 Gbps effective data rate.

The ArcticStorm water block that Zotac built for this card features a full-cover design, so it also covers parts of the graphics card that don’t need cooling. The cold plate is made of copper, and above the GPU there is a 0.3 mm microchannel structure to increase the contact area with the water inside the block for better thermal transfer. The fluid terminal comes with the industry-standard G1/4” threads, so if you already have a custom liquid loop, chances are that you’ll easily be able to add this card to it. Additionally, it comes with two fittings onto which you can squeeze tubes with an inner diameter of 10 mm.

ZT-P10800F-30P_image4

The GTX 1080 ArcticStorm offers the Spectra lighting system that illuminates the acrylic part of the water block with options to adjust the color, effects, and brightness. Zotac also includes a custom Zotac-themed backplate as a finishing touch.

Zotac hasn’t disclosed pricing information at this time.

Leave a Reply

Sign Up For Our Newsletter

Sign up to receive breaking news
as well as receive other site updates

Enter your Email


Preview | Powered by FeedBlitz

Log in

Copyright © 2008 - 2020 · StreetCorner Media , LLC· All Rights Reserved ·