Thermaltake Intros 360 mm Closed-Loop Cooler

Posted by at 1:48 pm on July 28, 2014

ThermaltakeWater-3.0-Ultimate-All-In-One-Liquid-Cooling-System_w_450

Thermaltake’s new Water 3.0 Ultimate is a triple-120 mm all-in-one liquid cooling unit. All-in-one liquid coolers are not everyone’s cup of tea, but they are certainly good enough for most people. Some folks prefer the all-in-one liquid coolers for their practicality and affordability, but want a little more performance than what most units provide. There are many cases with 280 mm radiator support, but some people won’t be able to fit these, whereas they will support 360 mm radiators as a result of their slightly narrower design. And that’s why Water 3.0 Ultimate exists.

The pump is built with the latest Asetek design, and is hooked up to a fairly standard 360 mm radiator with low-evaporation tubes. Airflow is provided by three 120 mm Thermaltake fans, which can be PWM controlled to range in speeds between 1000 and 2000 RPM. The pump will spin at about 3600 RPM. This unit won’t be the quietest, but it will perform quite well. If you want it to operate more quietly, you can always use voltage regulation to lower the pump speed and swap out the fans for alternate units.

Water-3.0-Ultimate-build_w_600

The biggest compatibility problem you will run into is supporting the large radiator. The pump and cold plate combination will fit on all modern CPU sockets, including Intel’s LGA1150, LGA2011, and AMD’s AM3+ and FM2+ sockets.

No word on pricing or availability ye

Leave a Reply

Sign Up For Our Newsletter

Sign up to receive breaking news
as well as receive other site updates

Enter your Email


Preview | Powered by FeedBlitz

Log in

Copyright © 2008 - 2024 · StreetCorner Media , LLC· All Rights Reserved ·